Huawei HCIA-Access V2.5 認定 H35-210_V2.5-ENU 試験問題:

1. When other SNMP parameters are configured correctly, how to configure the trap source address of the device to ensure that the network manager can receive device alarms normally?

A) The trap source address is set to the address used by the network manager to add the device
B) The trap source address is set to the loopback address
C) The trap source address is set to 127.0.0.1
D) All of the above.

2. Which of the following methods can realize the mutual communication between Ethernet switches across VLAN? (Multiple choice)

A) When different VLAN are on the same switch, routing and forwarding can be achieved by setting the IP address of the VLANIF.
B) When different VLAN are on different switches, cross-VLAN communication can be achieved by reasonably configuring the Hybrid port or the Trunk port.
C) By configuring MSTP on the switch, cross-VLAN communication can be achieved.
D) By deploying Smart-Link on the switch, cross-VLAN communication can be achieved.

3. Which of the following products are not part of the ONU series?

A) MA5600T
B) MA5652G
C) HG8247
D) MA5612

4. How many channels of ADSL2+&POTS access services are provided by the MA5600T ADSL2+&POTS integrated service board H80BCAME?

A) 32
B) 48
C) 64
D) 16

5. In the GPON network, which one of the following descriptions is correct?

A) Different ONUs are identified by Port-ID
B) Different GEM-PORTs are identified by Alloc-ID
C) Different T-CONTs are identified by Port-ID
D) Different ONUs are identified by ONU ID

質問と回答：