Cisco Conducting Cisco Unified Wireless Site Survey (CUWSS) v2.0 認定 642-732 試験問題:

1. An engineer is deploying centralized wireless solution with a 5508 controller. What is the most AP licenses that can be supported?

A) 1000
B) 100
C) 500
D) 250
E) 50

2. Which option allows the maximum 2.4-GHz channel usage for a survey and data deployment in the ETSI domain?

A) 1, 6, 9, 14
B) 1, 6, 11, 14
C) 1, 6, 11
D) 1, 5, 9, 13

3. Refer to the exhibit.

After performing a Layer 1 survey using Cisco Spectrum Expert, what is the result indicated by the visual screen?

A) Normal 802.11g activity
B) Normal 802.11b activity
C) Video camera interference
D) Microwave oven interference
E) Bluetooth device interference

4. When performing a post-installation audit using the Ekahau Survey tool, which four steps are associated with the passive portion of the audit? (Choose four.)

A) When you have completed the post-installation surveys, compare them to the surveys that were performed before the installation. They should look nearly identical.
B) Check for co-channel interference by standing near an access point on one channel and watching for other access points that are on the same channel.
C) Check to see if the signal levels on other access points that are heard on the same channel are at least 19 dBm weaker than the access point that you are next to.
D) Check that all channels are supported by the APs regardless of client capabilities.
E) Survey by SSID to ensure that smooth roaming is taking place.
F) Verify that the real-world network traffic (for example, physical data rate, packet loss, etc.) meets user requirements.

5. An engineer is conducting a site survey for use of Cisco 7925 wireless clients. Which two design criteria are necessary to ensure proper network design? (Choose two.)

A) 25 percent overlap
B) -67 dBm RSSI or better
C) -72 dBm RSSI or better
D) -65 dBm RSSI or better
E) 15 percent overlap
F) 20 percent overlap

質問と回答：