CompTIA Storage+ Powered by SNIA 認定 SGO-001 試験問題:

1. Which of the following is a common practice with regards to hot spares on a storage array utilizing RAID?

A) Create one hot spare for the entire storage array
B) Create one hot spare for every drive size and type
C) Create one hot spare for every thirty drives in the storage array
D) Hot spares are not recommended

2. Which of the following would be the appropriate technology an administrator would use to provision the desired amount of space to a server, while only the utilized disk space is consumed on the storage array?

A) Fat provisioning
B) Virtual provisioning
C) Concatenated groups
D) Volume groups

3. Which of the following will be required to be able to read the data on an encrypted LTO-4 backup tape, if the tape has to be imported at the DR target site?

A) Encryption keys from the source site
B) IPSec encryption keys and ACLs from the source site
C) An LTO-3 tape drive which supports encryption
D) Plain text cipher key from the source site

4. A SAN administrator is troubleshooting a connectivity issue between a new server and a FC switch. The link is running at 8Gbps and uses a 90 meter (295 feet) optical cable. Which of the following is the FIRST item the administrator should check or perform?

A) Upgrade the switch firmware to the latest level.
B) Run a temporary cable to bypass a patch panel.
C) Verify the cable is OM-3 and not OM-2
D) Replace the server's host bus adapter.

5. Which of the following would MOST easily prevent zoning conflicts and fabric segmentation?

A) Create separate fabrics as zoning can only be configured on one switch.
B) Configure zoning information on the HBA's not the storage switches.
C) Ensure zoning information from a new storage switch is cleared before adding it to the fabric.
D) Only configure zoning once at installation; reconfigure all switches if zoning must change.

質問と回答：