IBM Assessment: Virtualization Technical Support for IBM i -v1 認定 A4040-121 試験問題:

1. What is the correct method to install a firmware update on a single-image system?

A) Download the firmware and burn it to a CD, then perform a D-side manual IPL.
B) Install the appropriate firmware PTF package to the IBM i partition and IPL the partition.
C) From the DSPEMWSTS screen, use the function to "Update firmware from service machine."
D) Load the firmware CD to the optical drive and perform a LODRUN operation.

2. A customer has purchased a new BladeCenter H (BCH) and POWER blade to run IBM i. The POWER blade is configured with two Fibre Channel interlaces for attaching SAN and tape.
They have an IBM TS3500 tape library with a fibre channel connection, and current firmware is running through a fibre switch to another IBM i system. One port on the existing switch and one port in the BCH fibre switch has been zoned to provide a connection from the tape library to the BCH.
After IBM i 7.1 SLIC and base OS are installed on the blade from IBM distribution media, the tape library does not appear in the device configuration.
What is the most likely cause of the problem?

A) NPIV enablement was omitted when configuring the BCH switch.
B) The BCH switch configuration must match the link speed of the TS3500.
C) The existing switch does not support NPIV.
D) A switch-to-switch cable is required. A switch to device cable was shipped with the BCH by default.

3. Which VIO Server command lets an administrator enter a non-restricted root shell to allow environment setup and installation of vendor software?

A) setup_oem_env
B) oem_setup_env
C) oem_env_setup
D) env_oem_setup

4. A Power Systems server, running AIX, Linux and IBM i partitions, encounters performance problems.
To investigate the problem, the administrator wants to collect high-level cross-partition performance data from an IBM i partition.
What is required?

A) IBM Performance Management for Power Systems
B) IBM Performance Tools base product and option 2 (Agent feature)
C) IBM i Collection Services
D) IBM Performance Tools base product and option I (Manager feature)

5. What boot mode is required when installing a hosted AIX or Linux partition?

A) Diagnostic with default boot list (DIAG_DEFAULT)
B) Open Firmware OK prompt (OPEN_FIRMWARE)
C) Diagnostic with stored boot list (DIAG_STORED)
D) System Management Services (SMS)

質問と回答：