最新のH13-624_V5.5問題集で試験を準備する

FILL BLANK
The_____ feature of the OceanStor Pacific series enables frequently accessed data to be stored in NVMe SSDs, ensuring the response speed to hotspot data access.

A company has purchased several Huawei converged storage devices to deploy remote replication services. In this scenario, if a primary LUN is faulty and services need to be recovered, the administrator needs to disable protection for the secondary resource in the remote replication pair, that is manually set the secondary LUN to writable.

• A. TRUE
• B. FALSE

For Huawei flash storage, a user can configure the DME IQ service for upload logs, including performance logs and disk health analysis (DHA) logs. DHA logs refer to routine run logs of disks, which contain collected disk health and I/O statistics.

• A. TRUE
• B. FALSE

Assume a financial customer purchased six nodes of Huawei scale-out storage, including two compute nodes and four storage nodes. The service, storage, and management switches are deployed independently. An engineer needs to plan ports for 25GE switches. Which of the following statements is false about port planning?

• A. Aggregation ports do not need to be planned, but eight MGT ports should be planned to connect to the BMC/management switches.
• B. To plan node ports, each switch can use four to six 25GE ports to connect to compute nodes and storage nodes in sequence.
• C. During port planning, ports can be reserved. To disable the reserved ports, run the "shutdown" command.
• D. To plan Multichassis Link Aggregation Group (M-LAG) ports, each switch support two 100GE ports configured in M-LAG mode.

Assume an engineer needs to configure trap notification for multiple Huawei flash storage systems. Which statements are false about the configuration? (Choose all that apply.)

• A. To query or modify the security policy for the SNMP service, run the "show snmp safe_strategy" or "change snmp safe_strategy" command on the command-line interface (CLI).
• B. If SNMPv2c is used during trap notification configuration, you must configure a USM user in the storage system in order to log in to the upper-level external network management system.
• C. During the configuration of USM user information, the authentication algorithms include "MD5",
  "SHA", "SHA224", "SHA256", "SHA384", and "SHA512".
• D. If SNMPv1 or SNMPv3 is used during trap notification configuration, you must configure an SNMP community string in the storage system to interconnect with a third-party network management system.