IBM Virtualization Technical Support for IBM i -v1 認定 000-121 試験問題:

1. A PCIe card in the CEO of a 16-core Power 740 server has failed. The customer has removed the cover from the machine.
What must be done to complete the replacement of the failed PCIe card?

A) Power off the domain in service tools Remove the failed card Install the new card Replace the cover Power on the domain
B) Replace the failed card Replace the cover Power-up the managed system Restart all partitions
C) Use the service action menu on the HMO to remove power from the slot Replace the failed card Complete the service action to power the slot back on Replace the cover
D) Remove the failed card Install the new card Replace the cover

2. An administrator plans to use Live Partition Mobility on their two Power 740 systems. What is required for this environment?

A) VPM
B) AMM
C) VIOS
D) IVM

3. While creating a new partition and choosing appropriate I/O resources, nothing appears on the Tagged I/O screen to be selected as a "Load Source." Which of the following could cause this to happen?

A) Resources are only marked as Desired, not as Required.
B) The disk attached to the controller is not powered-on.
C) The CEO is not in "standby' mode.
D) Supported resources for a load source adapter have not been included in the profile.

4. In the following output from an IBM i partition from a POWER7 server, Simultaneous Multi-Threading (SMT) functionality in turned on:

How many processors are reported to the partition?

A) 2
B) 8
C) 16
D) 4

5. On an HMC under Systems Management and Servers there are three servers listed. One of them shows "no connection." The HMC can ping the configured ESP address. The server has power and the front panel displays HMC=0 in the lower left.
Which action is valid for this connection?

A) Operations-> Change Password
B) Operations-> Launch ASM
C) Properties
D) Operations-> Power On

質問と回答：